COLOSSUS 18XBN

Liên hệ

  • 2000 W Program Power.
  • 99 dB Sensitivity (1W/1m).
  • Lightweight neodymium magnet motor assembly. Weighs only 7.95 kg.
  • Great replacement driver for most bass reflex applications.
  • Vented chassis and motor design provides efficient thermal management and extremely low power compression.
  • High BL factor, 25.9 T/m.
  • Dual ‘spaced’ suspension system and advanced materials offers ultra-linearity, mechanical stability and superior acoustic performance at high levels of excursion.
  • Ribbed, fibre loaded, UK manufactured cone offers increased strength, durability and resistance to deformation under extreme loads.
  • Designed for optimum use in 100-250 Litre ported enclosure designs.
  • 4-inch Inside/ outside windings copper voice coil.

The Colossus 18XBN is intended for use as a high-output sub-bass driver either singly or in multi way systems. The unit features a 4 inch ‘sandwich’ inside and outside windings voice coil, immersed in a symmetric magnetic field and centralized by using two suspensions in a dual arrangement to maintain ultra linearity and stability at high excursions. The heavily ribbed straight-sided paper cone membrane is reinforced with high-strength composite fibres to resist deformation under extreme loads. The driver handles 1000 Watts (A.E.S.) continuous and can cope with peaks in excess of 4000 Watts. This is due to advanced thermal management in the form of a vented die-cast chassis and motor system using an internal heatsink coupled to a large vaned heatsink mounted on the rear of the unit. These measures effectively remove heat from the voice coil resulting in extremely low-power compression. The Colossus 18XBN is designed for use in 100 to 250 Litre ported enclosures.

Thông số kỹ thuật sản phẩm COLOSSUS 18XBN

Nominal Chassis Diameter 18" / 457.2 mm
Nominal Impedance 8 Ω
Minimum Impedance (Zmin) 7.9 Ω
AES Power Handling 1000 W (A.E.S.)
Program Power 2000 W
Peak Power (6dB Crest Factor) 4000 W (A.E.S.)
Frequency Range (-6dB) 35Hz - 1 kHz
Sensitivity (1W - 1m) Wideband 99 dB
Magnet Material Neodymium
Magnet Weight - oz
Magnetic Gap Depth 0.39" / 10 mm
Flux Density 1.2 Tesla
Former Material Glass Fibre
Voice Coil Material Copper - Inside/ Outside
Coil Winding Height 0.90" / 23 mm
Voice Coil Diameter 4" / 101.6 mm
Cone/ Dust Material Straight Poly-cellulose Ribbed Paper
Surround / Edge Termination Polyvinyl Damped Multi Roll. Poly Cotton
Speaker Type Sub Bass Driver

Go top
preloader