Liên hệ

  • Lightweight neodymium magnet assembly.
  • Weighs only 4.2 kg.
  • Fast dynamic response combined with superior suspension material.
  • Suited for line array applications.
  • Non inductive motor system reduces distortion.
  • High BL, 20 T/m.
  • UK manufactured cone with optimised pulp offering increased strength, durability and performance.

The Colossus 12BMN is intended for use as a very high-output mid bass driver in two-way ported enclosures and also as a bass driver in multi way systems. The unit features a 3 inch voice coil driven by a non-inductive motor system which dramatically reduces third-harmonic and intermodulation distortion. The cone membrane, manufactured from bespoke paper pulp allows the driver to combine high-sensitivity with the structural integrity required to produce undistorted low frequencies at high output levels. The mechanical and electrical properties of the unit have been carefully optimised to allow extended low frequency output up to its rated power handling of 450 Watts (A.E.S) continuous, with peak power handling in excess of 1800 Watts. The driver exhibits an average sensitivity of 99 dB and is best used in ported enclosures of 25 to 80 Litres.

Thông số kỹ thuật sản phẩm COLOSSUS 12BMN

Nominal Chassis Diameter 12" / 304.8 mm
Impedance 4 Ω / 8 Ω / 16 Ω
Minimum Impedance (Zmin) 7.5 Ω
Power Handling 450 W (A.E.S.)
Peak Power (6dB Crest Factor) 1800 W (A.E.S.)
Usable Frequency Range (-6dB) 40Hz - 3.5 kHz
Sensitivity (1W - 1m) Wideband 99 dB
Effective Piston Dlameter 10.24" / 260.09 mm
Magnetic Gap Depth 0.31" / 8.00 mm
Flux Density 1.16 Tesla
Coil Winding Height 0.78" / 20.00 mm
Voice Coil Diameter 3.0" / 76.2 mm
Speaker Type Bass / Mid Range Driver

Go top